Filter
Top Products
Brocade Mobility RFS4000, RFS6000 and RFS7000 CLI Reference Guide 651
53-1001931-01
Wireless configuration commands
20
client-bridge
[bb-radio|
bridge-selectmode|
enable|
mesh-timeout <2-200>|
ssid <SSID>]
Defines client bridge settings.
• bb-radio <1-16> <MAC>– add the preferred base bridge
details.
• <1-16> – Enables the capability
• MAC – MAC address in AA-BB-CC-DD-EE-FF format
• bride-select-mode [auto|manual]– Base bridge selection
mode
• auto – Automatically select base bridge
• manual – Manually select base bridge
• enable – Enables client-bridge functionality on radio
• mesh-timeout [0|1|<2-200>] – Sets the client bridge link
timeout.
• 0 – Disable uplink detection
• 1 – Uplink detect - shutdown when all mesh-backhaul
links are down
• <2-200> – Timeout in seconds.
• ssid <SSID> – Defines the ESSID of the WLAN
copy-config-from
[<1-4096>|default-11a|
default-11b|
default-11bg|]
Copies the configuration from a previously configured radio.
• <1-4096> – Defines a single radio index
• default-11a – Uses the default 11a configuration template.
• default-11b – Uses the default 11b configuration template.
• default-11bg – Uses the default 11bg configuration
template.
description <description> Defines a description for this radio. <description> is a 20
character string.
detector Dedicates this radio as a detector. No wireless clients can
associate to a detector.
dot11k [enable|
quiet-element
{default|duration
<20-150>|enable}]
Displays dot11k related commands.
• enable – Enables 802.11k for the radio
• quiet-element {default|duration|enable} – Displays quiet
element configuration
• default – Setting it to defaults
• duration <20-150> – Time to remain quiet in TUs
• <20-150> {interval} – Range of Quiet duration in
K-u seconds
• interval <200-255> – Displays the interval time in
which quiet element is sent after specified number
of Beacons
• <200-255> – Range of quiet interval
• enable – Enables the Quiet Element
dtim-period<1-50> {bss
<1-4>}
Set the DTIM period (number of beacons between successive
DTIMs).
• <1-50> – Sets the DTIM period
• bss <1-4>– Optional BSS index
enforce-spec-mgmt enable Enforces spectrum management checks on specified radios. Only
wireless clients that advertise spectrum management capabilities
will be allowed to associate on this radio.
enhanced-beacon-table Enables the enhanced beacon table for AP locationing.
enhanced-probe-table Enables the enhanced probe table for Client locationing.