Brocade Mobility RFS4000, RFS6000 and RFS7000 CLI Reference Guide 537
53-1001931-01
Configuring the DHCP server using controller CLI
17
unitcast-enable
DHCP Config commands
Enables unicast for DHCP offer and DHCP Ack
Supported in the following platforms:
• Mobility RFS4000 Controller
• Mobility RFS6000 Controller
• Mobility RFS7000 Controller
Syntax
unicast-enable
Parameters
None
Example
RFController(config-dhcp)#unicast-enable
RFController(config-dhcp)#
Configuring the DHCP server using controller CLI
The controller DHCP configuration is conducted by creating pools and mapping them to L3
interfaces (SVI).
• A Network pool is the pool with “include” ranges. When the network pool is mapped to a L3
interface, DHCP clients requesting IPs from the L3 interface get an IP from the configured
range.
• A host pool is the pool used to assign static/fixed IP address to DHCP clients.