Filter
Top Products
Brocade Mobility RFS4000, RFS6000 and RFS7000 CLI Reference Guide 505
53-1001931-01
Configuring MAC Extended ACL
16
licenses Show any installed licenses
logging Show logging configuration and buffer
mac Internet Protocol (IP)
mac-address-table Display MAC address table
mac-name Displays the configured MAC names
management Display L3 Managment Interface name
mobility Display Mobility parameters
ntp Network time protocol
password-encryption password encryption
port-channel Portchannel commands
protocol-list List of protocols
privilege Show current privilege level
radius RADIUS configuration commands
redundancy Display redundancy group parameters
rtls Real Time Locating System commands
role Configure role parameters
running-config Current Operating configuration
securitymgr Securitymgr parameters
service-list List of services
sessions Display current active open connections
mtp-notofication Display SNMP engine parameters
snmp Display SNMP engine parameters
snmp-server Display SNMP engine parameters
spanning-tree Display spanning tree information
startup-config Contents of startup configuration
static-channel-group static channel group membership
terminal Display terminal configuration parameters
traffic-shape Display traffic shaping
timezone Display timezone
upgrade-status Display last image upgrade status
users Display information about currently logged in users
version Display software & hardware version
virtual-ip IP redundancy feature
wireless Wireless configuration commands
wlan-acl wlan based acl
RFController(config-ext-macl)#show
Configuring MAC Extended ACL
MAC Extended ACLs contain rules based on the following parameters:
• Source MAC address
• Destination MAC address
• Ethertype– accepts well known types like IP, ARP, VLAN or an integer value between 1-65535.
• VLAN-ID
• VLAN 802.1p user priority
Source and Destination MAC address are mandatory parameters.
Execute the following commands to configure a MAC extended ACL with different rule parameters
on the controller: