522 Brocade Mobility RFS4000, RFS6000 and RFS7000 CLI Reference Guide
53-1001931-01
DHCP Config commands
17
hardware-address
DHCP Config commands
Reserves an IP address (manually) based on a DHCP client’s hardware address. Use the
no
hardware-address
command to remove this from the DHCP pool.
Supported in the following platforms:
• Mobility RFS4000 Controller
• Mobility RFS6000 Controller
• Mobility RFS7000 Controller
Syntax
hardware-address <MAC> {[ethernet|token-ring]}
Parameters
Usage Guidelines
Accepts only hexadecimal values
Example
RFController(config-dhcp)#hardware-address 00:01:23:45:32:22
RFController(config-dhcp)#
hardware-address
<MAC> {ethernet|token-ring}
Sets the client's hardware address to <MAC>. <MAC>
can be in the format xx-xx-xx-xx-xx-xx (dashed
hexadecimal string) or XX:XX:XX:XX:XX:XX (dotted
hexadecimal string)
• <MAC> {ethernet|token-ring} – Defines a dashed
hexadecimal string
• <MAC> {ethernet|token-ring} – Sets a dotted
hexadecimal string.
• ethernet – Ethernet
• token-ring – Token ring network