![](http://pdfasset.owneriq.net/c/9c/c9ceb723-53f1-4484-9e87-1ae9320ad42f/c9ceb723-53f1-4484-9e87-1ae9320ad42f-bg213.png)
Brocade Mobility RFS4000, RFS6000 and RFS7000 CLI Reference Guide 529
53-1001931-01
DHCP Config commands
17
network
DHCP Config commands
Sets the network pool’s IP address
This address maps the current DHCP pool with a specific network.
Supported in the following platforms:
• Mobility RFS4000 Controller
• Mobility RFS6000 Controller
• Mobility RFS7000 Controller
Syntax
network [<IP>|<IP/Mask>]
Parameters
Usage Guidelines
Ensure a VLAN interface (with specific network/subnet) exists on the controller before mapping a
DHCP pool to a particular network.
Example
RFController(config-dhcp)#network 2.2.2.0/24
RFController(config-dhcp)#
network [<IP>|<IP/Mask>] Sets the network number and mask
• <IP> – Network number in dotted decimal format
• <IP/Mask> – Network number and mask