Filter
Top Products
Brocade Mobility RFS4000, RFS6000 and RFS7000 CLI Reference Guide 783
53-1001931-01
smart-rf config commands
25
Parameters
<1-4096> [antenna-gain |
coverage-rate |
lock-auto-assign |
radio-mac | rescuer]
Sets the following parameters for the selected radio:
• antenna-gain <GAIN> – Sets the antenna-gain value to GAIN
for the selected radio.
• coverage-rate [1|2|5p5|6|9|11|12|18|24|36|48|54] –
Sets the coverage rate threshold value for under-coverage
detection to the selected value from the list.
• lock-auto-assign [all|channel|detector|power|rescuer] –
Locks rf configuration from automatic smart rf assignments.
• radio-mac <AA-BB-CC-DD-EE-FF> – Sets the radio MAC
address for the radio with the selected index.
• rescuer {AA-BB-CC-DD-EE-FF <4-20> <0-65535> } – Sets the
MAC address for the rescuer radio. The following parameters
are also set:
• <4-20> – Boost power to cover for the defective radio.
• <0-65535> – Attenuation from the rescuer radio
to the selected radio. This is for information
purposes only.
• width [auto|dual|single] - Configures channel-width
preference during calibration
• auto - Auto channel-width - lets smart-rf figure out the
best channel-width
• dual - Dual channel-width - 40 MHz
• single - Single channel-width - 20 MHz
AA-BB-CC-DD-EE-FF
[antenna-gain |
coverage-rate |
lock-auto-assign | rescuer]
Sets the following parameters for the selected radio.
• antenna-gain <GAIN> – Sets the antenna-gain value to GAIN
for the selected radio.
• coverage-rate [1|2|5p5|6|9|11|12|18|24|36|48|54] –
Sets the coverage rate threshold value for under-coverage
detection to the selected value from the list.
• lock-auto-assign [all|channel|detector|power|rescuer] –
Locks rf configuration from automatic smart rf assignments.
• rescuer {AA-BB-CC-DD-EE-FF <4-20> <0-65535> }– Sets the
MAC address for the rescuer radio. The following parameters
are also set:
• <4-20> – Boost power to cover for the defective radio.
• <0-65535> – Attenuation from the rescuer radio
to the selected radio. This is for information
purposes only.
RADIO [antenna-gain|
coverage-rate|
lock-auto-assign]
Sets the radio parameters to a set of radio indices.
• antenna-gain <GAIN> – Sets the antenna-gain value to GAIN
for the selected radio.
• coverage-rate [1|2|5p5|6|9|11|12|18|24|36|48|54] –
Sets the coverage rate threshold value for under-coverage
detection to the selected value from the list.
• lock-auto-assign [all|channel|detector|power|rescuer] –
Locks rf configuration from automatic smart rf assignments.
all-11a [antenna-gain|
coverage-rate|lock-auto-ass
ign]
Sets the radio parameters for all 802.11a radios.
• antenna-gain <GAIN> – Sets the antenna-gain value to GAIN
for the selected radio.
• coverage-rate [1|2|5p5|6|9|11|12|18|24|36|48|54] –
Sets the coverage rate threshold value for under-coverage
detection to the selected value from the list.
• lock-auto-assign [all|channel|detector|power|rescuer] –
Locks rf configuration from automatic smart rf assignments.