Filter
Top Products
792 Brocade Mobility RFS4000, RFS6000 and RFS7000 CLI Reference Guide
53-1001931-01
smart-rf config commands
25
Parameters
Example
RFController(config-wireless-smart-rf)#service show cli
Smart-RF Configuration mode:
+-assignable-power-range
+-<4-20>
+-<4-20> [assignable-power-range <4-20> <4-20>]
+-auto-assign
+-all
+-enable [auto-assign (detector|channel|power|rescuer|all) enable]
+-channel
+-enable [auto-assign (detector|channel|power|rescuer|all) enable]
+-detector
show cli Displays the CLI tree of the current mode.
smart-rf [clear-history |
load-from-file|
max-history|replay|
rescue|restore|
save-to-file|simulate|
step-calibrate]
Smart RF related commands are executed from this service
command.
• clear-history – Clears assignment history
• load-from-file – Loads Smart RF record from file smart.bin
• max-history <0-65535> – Sets the number of assignment
items to be retained as history.
• replay enable – Enables the Smart RF replay mode
• rescue <WORD> – Enables force rescue operation
• restore <WORD> – Removes any recovering operation on
given radio
• save-to-file – Saves Smart RF records to the local file
smart.bin
• simulate [coverage-hole|interference] – Simulates the
different radio events
• coverage-hole <UINT_RANGE> – Simulates the
coverage-hole event
• UINT_RANGE [pattern-11a|pattern-11b
|pattern11bg|pattern-2-mbps] – provide
simulated Client’s allowed
• interference – Simulates radio interferences
• step-calibrate [assign-channels|assign-detectors|
assign-power|assign-prepare|assign-rescuers|
collect-data|prepare-detectors|pull-rf-config|
push-rf-config|sync-rf-config] – Manages Smart-RF
commands
• assign-channels – Assigns channels to radios
• assign-detectors – Assigns detectors
• assign-power – Assigns tx power to radios
• assign-prepare – Prepares assignment
• assign-rescuers – Assigns rescuers along with
recovering power
• collect-data – Collects site measurement data
• prepare-detectors – Prepare prior to assign
detectors
• pull-rf-config – Pull RF-configuration from cluster
members
• push-rf-config – Push Rf-configuration to cluster
members
• sync-rf-config – Sync RF-configuration of cluster
members