Filter
Top Products
22 - 1
USING THE BROTHER MFC WITH A NEW POWER MACINTOSH
®
G3, G4 OR IMAC
™
/IBOOK
22
22
Using the Brother MFC with
a New Power Macintosh
®
G3, G4 or iMac
™
/iBook
Set up Your USB Equipped Apple
®
Macintosh
®
G3,G4 or iMac
™
with
Mac OS 8.5/8.51/8.6/9.0
Set up your USB Equipped Apple
®
Macintosh
®
with Mac OS 8.5/8.51/8.6/9.0
for your MFC: (For Scanner driver works with Mac OS 8.6/9.0)
Notice to Computer Users
A small filter core and cable tie are enclosed in a vinyl bag with your MFC.
PLEASE SAVE THESE PARTS. You will need them in the future if you
connect the MFC to a Computer. For optimal performance, use a USB Cable
with the enclosed Filter Core and Cable Tie.
When you use a Macintosh
®
with your MFC, please attach the enclosed Filter
Core to a USB Cable.
1
Attach the Cable Tie 2 inches or less from the end of the USB Cable that will be
inserted into the MFC.
2
Attach the filter core between the USB Cable Connector and the Cable Tie by
pressing until you hear a click.
Set up your MFC and make sure that it is working properly.
Note
Before you can connect the MFC to your Machintosh
®
, you must purchase a
USB cable that is no longer than 6 feet (1.8 meters).
Cable Tie
Filter Core
USB Cable
To MFC
2 inches
Cable Tie
USB Cable
Filter Core
connector