Filter
Top Products
7 - 3
SETUP SEND
Manual Transmission
Manual transmission lets you hear the dial tone, ringing and fax receiving tones
before sending the fax.
1
Place the original face down in the ADF.
2
Pick up the handset and listen for a dial tone.
3
Enter the fax number you want to call (you can enter the digits using the dial
pad, or you can enter a One Touch or Speed Dial number or you can call using
Search). (See One-Touch Dialing, page 8-5.)
4
When you hear the fax tone, press Start.
5
Replace the handset.
Automatic Transmission
This is the easiest way to send a fax. IMPORTANT: Do not pick up the
handset.
1
Place the original face down in the ADF.
2
Enter the fax number using the dial pad, One Touch, Speed Dial or Search. (See
Speed Dialing, page 8-5.)
3
Press Start.
Color Fax transmission
Your Multi-Function Center allows you to transmit a color fax.
1
Place the original face down in the ADF.
2
Press Resolution to select the Color Fax.
3
Enter the fax number using the dial pad, One Touch, Speed Dial or Search.
4
Press Start.
Manual and Automatic Fax Redial
If you’re sending a fax manually and the line is busy, press Redial/Pause to
retry the number.
If you’re sending a fax automatically and the line is busy, the MFC will
automatically redial up to three times at 5 minute intervals.
When you are sending a color fax, the MFC starts sending the fax without
scanning the original into memory.