Filter
Top Products
23 - 2
IMPORTANT INFORMATION
If you experience trouble with your MFC 7300C or MFC 7400C, please contact
a Brother Authorized Service Center for information on obtaining service or
repair. The telephone company may ask that you disconnect this equipment
from the line until the problem has been corrected or until you are sure that the
equipment is not malfunctioning.
If you are not able to solve a problem with your MFC, contact Brother at
WARNING
For protection against the risk of electrical shock, always disconnect all cables
from the wall outlet before servicing, modifying or installing the equipment.
This equipment may not be used on coin service lines provided by the
telephone company or connected to party lines.
Brother cannot accept any financial or other responsibilities that may be the
result of your use of this information, including direct, special or consequential
damages. There are no warranties extended or granted by this document.
WARNING
Important—About the Interface Cable
This machine has been certified to comply with FCC standards, which are
applied to the USA only. The shielded interface cable supplied with your MFC
should be used according to FCC 15.27 (C). In addition, a grounded plug
should be plugged into a grounded AC outlet after checking the rating of the
local power supply for the printer to operate properly and safely.
USA: 1-800-284-4329
1-908-575-8790
(voice)
(fax)
From within Canada: 1-800-853-6660
1-514-685-4898
(voice)
(fax)
From within Montreal: 1-514-685-6464 (voice)