Filter
Top Products
SETUP SEND
7 - 4
Dual Access (Not Available for Color Fax)
You can scan up to 50 documents into the fax memory, even while the machine
is receiving or sending another fax (from memory). You can set temporary
settings for each fax you’re scanning, except Polling.
If you try to scan in and store a 51st fax, the machine will send it immediately,
without storing it in memory.
1
Place the original in the ADF.
2
Enter the fax number.
3
Press Start. The machine starts scanning the document and the screen displays
the job number (#XX) of the fax and how much memory is available. Then the
machine starts dialing. You can immediately repeat steps 1 through 4 for the
next fax.
Real Time Transmission
When you are sending a fax, the MFC will scan originals into memory before sending.
Then, as soon as the phone line is free, the MFC will start dialing and sending the fax.
If memory becomes full, the MFC will send the document in real time, even if REAL
TIME TX is set to OFF.
Sometimes you may want to send an important document immediately, without
waiting for memory transmission. You can set REAL TIME TX to ON.
1
Place the original face down in the ADF.
2
Press Function, 1, 3, 9.
3
To change the default setting, press or
to select ON (or OFF) and press Set.
Go to Step 5—OR—For the next fax
transmission only, press
or to select NEXT FAX ONLY and press Set.
4
For the next fax only, press or to select ON (or OFF) and press Set.
5
Press 1 if you want to select additional settings. The display returns to the
SETUP SEND menu—OR—Press 2 if you are finished choosing settings and
go to Step 6.
6
Enter fax number and press Start.
Note
If you get a MEMORY FULL message while scanning the first page of a fax,
press Stop to cancel scanning. If you get a MEMORY FULL message while
scanning in a subsequent page, you’ll have the option to press Start to transmit
the pages scanned so far, or to press Stop to cancel the operation.
Note
Your machine normally operates in Dual Access mode. However, to send a
color fax, you must override Dual Access and use Real Time Transmission.
The number of pages you can scan into memory varies with the data they
contain.
9.REAL TIME TX
REALTIME TX:ON?