Filter
Top Products
ASSEMBLY AND CONNECTIONS
2 - 7
Installing the Ink Cartridges
1
Check that you turned on the power (by
plugging in the power cord). The screen
alternately displays
2
Open the control panel cover by pulling it toward you ( ), then lift the top cover
toward the back ( ). After a few seconds, the print head will move left to its
replacement position.
3
Remove the yellow shipping cover by pulling it toward you and lifting it up and
out.
Caution
■ The bottom of the yellow
shipping cover is wet with
ink that will cause stains, so
wipe it clean before you
place it down. Keep the
yellow shipping cover in a
safe place. You will need it
in the future when you
replace the print head.
We recommend that you install the ink cartridges from left to right in this order:
Black, Yellow, Cyan, Magenta.
SET CARTRIDGES
PLS OPEN COVER
1
2
Top Cover
Control Panel
Cover
Yellow Shipping Cover