Filter
Top Products
5 - 4
INITIAL SETUP
Setting Beeper Volume
You can set the beeper to LOW, HIGH or OFF. The default setting is LOW.
When the beeper is set to LOW or HIGH, the MFC beeps every time you press
a key or make an error, and at the end of fax sending or receiving.
1
Press Function, 1, 1, 3.
2
Press or to select your setting.
3
When the screen displays the setting you want, press Set.
4
Press Stop to exit.
Choosing the Handset Volume
Before you begin to use the machine, you must decide if you need to set the
handset volume to AMPLIFY:ON for a user who is hearing-impaired. The
AMPLIFY volume level complies with FCC standards.
VOLUME AMPLIFY: OFF
This default setting is appropriate if none of the users are hearing-impaired.
During a conversation, users can press Volume
or on the control panel
to adjust the volume to LOW or HIGH. When the handset is replaced, the
handset volume will remain until you change it again.
VOLUME AMPLIFY: ON—TEMPORARY
This setting is appropriate if some of the users are hearing-impaired. During a
conversation, users can press Volume
or on the control panel to adjust
the volume to LOW, HIGH or AMPLIFY. When the handset is replaced, the
handset volume returns to the default setting of LOW.
VOLUME AMPLIFY:ON—PERMANENT
Choose VOL AMPLIFY:ON—PERMANENT if all of the users are
hearing-impaired. During a conversation, users can press Volume
or on
the control panel to adjust the volume to LOW, HIGH or AMPLIFY. When the
handset is replaced, the handset volume returns to the default setting of
AMPLIFY.
WARNING
It is important that you do not choose PERMANENT unless all the users
are hearing-impaired. Otherwise, the default setting of AMPLIFY may
damage the hearing of some users.
When you press Volume or on the control panel to adjust the volume,
the display shows the setting you are choosing. Each key press changes the
volume to the next setting.