Filter
Top Products
7 - 11
SETUP SEND
Multiple Resolution Transmission
(Not Available for Color Fax)
Use this feature to select separate resolution settings for each page of the fax
you’re sending. This could be useful if you’re sending a fax with photos and
letters, or some pages with small print and others with normal print. Resolution
settings return to STANDARD after the fax is sent.
1
Place the original face down in the ADF.
2
Press Function, 1, 3, 4.
3
Press or to select resolution for page 1, then press Set.
4
Repeat Step 3 for subsequent pages.
5
Press Stop when you’re finished.
6
Press 1 if you want to select additional settings. The display returns to the
SETUP SEND menu—OR—Press 2 if you are finished choosing settings, and
go to Step 7.
7
Enter the fax number you’re calling.
8
Press Start.
STANDARD—For most typed documents.
FINE—Good for small print; transmits slower than standard resolution.
S.FINE—Good for small print or art work; transmits slower than fine
resolution.
PHOTO—Use when document has varying shades of gray; slowest
transmission time.
Setting Up Polled Transmit
(Not Available for Color Fax)
Polled Transmit is when you set up your MFC to wait with a document so
another fax machine can retrieve it.
1
Place the original to be retrieved face down in the ADF.
2
Press Function, 1, 3, 8.
3
Press or to choose POLLED
TX:ON? and press Set.
4
Press 1 to select DOC if you want your
MFC to scan the printed document at the
time it is polled—OR—Press 2 to select
MEMORY.
5
Press 1 if you want to select additional settings. The display returns to the
SETUP SEND menu—OR—Press 2 if you are finished choosing settings and
go to step 6.
POLLED TX:OFF?
SELECT <- -> & SET
1.DOC 2.MEMORY