Filter
Top Products
6 - 8
SETUP RECEIVE
Canceling a Scheduled Job
You can cancel tasks you’ve scheduled, such as Delayed Fax or Polling
Transmit. (See Checking Job Status, page 7-5.)
1
Press Function, 1, 4. Any waiting jobs
appear on the display. If no job is
waiting, the screen displays “NO JOB WAITING.”
2
If you have more than two jobs waiting, press or to select the job you
want to cancel and press Set.
—OR—
If you have only one job waiting, go to step 3.
3
Press 1 to cancel—OR—Press 2 to exit without canceling.
To cancel another job, return to Step 2.
4
Press Stop to exit.
Distinctive Ring
This MFC feature lets you use the Distinctive Ring subscriber service offered
by some telephone companies, which allows you to have several telephone
numbers on one phone line. Each phone number has its own Distinctive Ring
pattern, so you’ll know which phone number is ringing. This is one way you can
have a separate phone number for your MFC.
Your MFC has a Distinctive Ring function, allowing you to dedicate one phone
number just for receiving faxes. You’ll need to follow the directions below to
“register” the new Distinctive Ring pattern, that was assigned by the Telephone
Company, so your MFC can recognize its incoming calls. (Call your Telephone
Company if you don’t know your ring pattern.)
You can change or cancel the Distinctive Ring pattern at any time. You can
switch it off temporarily, then turn it back on. When you get a new fax number,
make sure you reset this function.
You can register only one Distinctive Ring pattern with the MFC. Some ringing
patterns cannot be registered.
■ The MFC will answer only calls to its registered number.
■ To have your TAD answer only the main number, the MFC must be in Manual
Mode.
■ In FAX/TEL or FAX mode, the MFC will answer all numbers on the phone line.
4.REMAINING JOBS