Filter
Top Products
2 - 2
ASSEMBLY AND CONNECTIONS
Choosing a Location
Place your MFC on a flat, stable surface, such as a desk. Select a place that is
free of vibration and shocks. Locate the MFC near a telephone jack and a
standard, grounded power outlet. Choose a location where the temperature
remains between 50°F and 95°F (10°–35°C).
WARNING
■ Never install telephone wring during a lightning storm.
■ We recommend that this product be used with a surge protection device to protect the
product against lightning storms.
■ Never install a telephone jack in a wet location unless the jack is specifically designed
for a wet location.
■ Never touch telephone wires or terminals that are not insulated unless the telephone
line has been disconnected at the network interface.
■ Use caution when installing or modifying telephone lines.
■ Avoid using a telephone (other than a cordless type) during an electrical storm. There
may be a remote risk of electric shock from lightning.
Note
If an item is missing, call Brother Customer Service at 1-800-284-4329 (USA),
1-800-853-6660 (from within Canada) or 1-514-685-6464 (from within Montreal).
See Ordering Accessories and Supplies on page ii for the correct item numbers.
Whenever you transport the MFC, use the packing materials that came with
your MFC. If you do not pack the MFC correctly, you may void your warranty.
Avoid placing your MFC in a high-traffic area. Do not place near heaters, air
conditioners, water, chemicals, or refrigerators. Do not expose the MFC to
direct sunlight, excessive heat, moisture, or dust. Do not connect your MFC to
electrical outlets controlled by wall switches or automatic timers. Disruption of
power can wipe out information in the MFC’s memory. Do not connect your
MFC to electrical outlets on the same circuit as large appliances or other
equipment that might disrupt the power supply. Avoid interference sources,
such as speakers or the base units of cordless phones.
NO !
NO !
NO !