Filter
Top Products
AUTO DIAL NUMBERS AND DIALING OPTIONS
8 - 6
Access Codes and Credit Card Numbers
Sometimes you may want to choose from among several long distance carriers
when you make a call. Rates may vary depending upon the time and destination.
To take advantage of low rates, you can store the access codes or long-distance
carriers as One Touch numbers. You can store these long dialing sequences by
dividing them and setting them up on separate keys in any combination. You can
even include manual dialing using the dial pad. The combined number will be
dialed in the order you entered it, as soon as you press Start. (See
Storing One
Touch Dial Numbers
, page 8-1.)
You can store “555” on One Touch key 3 and “7000” on One Touch key 2. If
you press One Touch 3, 2, and Start, you can dial “555-7000”. To temporarily
change a number, you can substitute part of the number with manual dialing
using the dial pad. For example, to change the number to 555-7001 you could
press One Touch 3 and press 7, 0, 0, 1 using the dialing pad.
Search
You can search for names you have stored in One Touch and Speed Dial
memories. Names are stored alphabetically. (See
Storing One Touch Dial
Numbers
, page 8-1 and Storing Speed Dial Numbers, page 8-2.)
1
Press Search/Speed Dial, then enter the first letter of the name you’re looking
for.
2
Press or to search the memory.
3
When the screen displays the name you want to call, pick up the handset.
4
Press Start to begin dialing.
5
When the call is over, hang up.
Note
If you must wait for another dial tone at any point in the dialing sequence, store
a pause at that point in the number by pressing Redial/Pause. Each key press
adds a 3.5 second delay.