Filter
Top Products
3 - 1
PAPER
3
3
Paper
The quality of your document can be affected by the kind of paper you use in
the MFC. You can use plain paper, coated paper, transparencies, glossy paper,
organizer paper, and envelopes. We recommend testing various papers before
purchasing large quantities. For best results, use Brother special coated paper,
glossy paper, and transparencies. (See page ii for information about ordering
Brother accessories).
About Brother Paper
Brother paper is manufactured specifically for this MFC, to provide optimum
print quality.
High Quality Coated Paper for Color Ink Jet printing—super fine
mode (BP72CL for letter)
Color Ink Jet Transparencies—fine mode (BPTRL for letter)
Color Ink Jet Glossy Paper—superfine mode (BPGLL for letter)
■ For optimum output quality, we recommend you use only genuine Brother
paper.
■ Brother coated (ink jet) paper is coated only on one side. Therefore, when
loading paper in the paper cassette, make sure that the whiter side (the coated
side) is facing up.
■ The coated side of glossy paper is shiny. Do not touch the shiny side. Load
glossy paper in the feeder with the shiny side facing up toward you.
■ DO NOT touch the coated side of the paper or both sides of Transparencies,
because it absorbs water and perspiration easily, and might cause decreased
output quality.
■ For optimum output quality, be sure to use paper appropriate for your resolution
setting.
■ Store paper in the original bag, and keep it sealed. Keep the paper flat and away
from moisture and direct sunlight and heat.
■ Transparencies designed for laser printers/copiers may stain your next
document. Use only recommended transparencies.
Note
When you print on coated paper, transparencies, and glossy paper, be sure to
select the correct media in the “Quality/Color” tab in the printer driver. When
using coated paper, transparencies or glossy paper, avoid stacking by removing
each page after copying or printing.