Filter
Top Products
Canon FAX-L800 User’s Guide ENGLISH
9-4 Chapter 9Using a Relay Network
2. Give the relay group a number from 00 to 99.
SET
Press SET.
SETUP FILE
SET RLY TX GROUP# 00
1
4
7
2
5
8
0
3
6
9
ABC
GHI
PQRS
JKL
TUV
MNO
WXYZ
DEF
SET
Use the buttons on the numeric keypad to enter the two-digit relay group
number and press SET.
SETUP FILE
1.GROUP DIAL NAME
<
<
Use the search buttons to display all the items in the menu.
SET
With the item displayed that you want to set, press SET. Then follow the
instructions in the table below to set up the relay group.
When you are finished, press STOP.
Relay Group Setup Summary
The default settings, shown in bold, remain in effect unless you change them.
1.GROUP DIAL NAME Name (24 characters)
Enter a name for the relay group. The name can be up to 24-characters
long. Then press SET.
2.PASSWORD 0000-9999
This is the four-digit password that protects the relay box settings you
are about to set up. After you set this password, you will have to enter
it every time you want to view or change these settings. Enter a four-
digit password and press SET.
3.SUBADDRESS 20 digits (
*
# spaces)
This is the ITU-T subaddress. Enter a number up to 20 digits long (it
can include spaces and the symbols
*
and #).
4.RX PASSWORD 20 digits (
*
# spaces)
When your fax is the relay unit, this ITU-T password must match the
ITU-T password of the document sent from the orginator in order for
your fax to receive the document. Otherwise, your fax will not receive
the document. Enter a number up to 20 digits long (it can include
spaces and the symbols
*
and #).