Canon FAX-L800 Fax Machine User Manual


 
Canon FAX-L800 User’s Guide ENGLISH
2-28 Chapter 2Setting Up
The unit has warmed up and is ready to use when you see the date and time
display.
26/12 ’97 FRI 12:20
When the date is displayed on the LCD, the fax is in the standby mode and ready
for normal operation. If the alarm starts blinking red, wait for one of the
following messages to appear.
REPLACE CARTRIDGE The toner cartridge has run out of toner.
Replace the toner cartridge.
CHECK PRINTER COVER The printer cover is not closed completely. If it
does not close easily, do not force it. Remove the
toner cartridge, and insert it again. Make sure it
is sitting level inside the fax machine then close
the printer cover again. And make sure the toner
cartridge is installed in the fax unit.
SUPPLY REC. PAPER One of the paper cassettes is empty or one of the
paper cassettes is not seated correctly inside the
fax machine. Remove each cassette. Make sure
the stack of paper is below the tabs and insert
the paper cassette again. Push the paper
cassettes all the way in until they lock in place.
When ENERGY SAVER is ON, the fax switches to the energy save mode in a
specified length of time (Q3-19, 16-26). The ENERGY SAVER indicator lights
red and ENERGY SAVER appears in the LCD display.
ENERGY SAVER
ENERGY SAVER
To restore to the standby mode, press the ENERGY SAVER button.