Filter
Top Products
Canon FAX-L800 User’s Guide ENGLISH
11-13Chapter 11 Setting Up and Using Polling
6. Press STOP to return to standby.
Setting Up Polling Sending
This section shows you how to set up your fax to store and hold a document until
it is polled by another fax to send it.
Before You Can Be Polled to Send
Before you set up your polling box, contact the parties who are going to poll your
fax to receive documents and confirm the following points:
½ The other parties must know your ITU-T subaddress number.
½ If you are also using an ITU-T password for the polling box, they must also
know this password. This password setting is optional.
½ Your TX PASSWORD must match the ITU-T password attached when the
other party calls you. Confirm that the TX PASSWORD on your fax matches
the ITU-T password attached when the other party calls you.
½ If the other party’s fax does not support ITU-T subaddress/password
transactions, you may be able to use the polling box #00.
Setting Up a Polling Box
Before you can use polling sending, you must create a polling box with the File
settings. The polling box holds the document in the memory until the other party
polls your fax to send the document.
1. Open the FILE SETTINGS menu.
DATA REGISTRATION
Open both One-touch Speed Dialling panels. Then press DATA
REGISTRATION.
REGISTRATION
1.DATA REGISTRATION
SET
Press SET.
DATA REGISTRATION
1.USER SETTINGS