Filter
Top Products
Canon FAX-L800 User’s Guide ENGLISH
3-3Chapter 3 Getting Started
ቢ LCD Display
Displays messages and prompts during operation.
Displays selections, text, numbers and names when
registering information.
ባ Resolution
Sets the resolution for documents you send.
ቤ Contrast
Adjusts the lightness/darkness of documents you send
or copy.
ብ Document type
Adjusts quality for documents with only text or with
both photos and text.
ቦ One-touch Speed Dialling buttons
Dial numbers registered under One-touch Speed
Dialling buttons.
ቧ One-touch Speed Dialling panels
The first panel displays buttons 01-32. Open the first
panel to access buttons 33-64. Open the second panel
to access buttons 65-72 and the registration buttons.
ቨ Numeric keypad
Use the buttons on the numeric keypad to enter phone
numbers when dialling. These buttons also enter text,
numbers, and symbols when registering names and
numbers.
ቩ Speaker volume switch
Adjusts the volume of the speaker.
ቪ Alarm
Blinks red after a problem occurs. The problem is
described by a message in the LCD display above.
ቫ Energy saver
Switches the fax out of the energy save mode.
ቭ Change cartridge
Lights when toner in the toner cartridge runs low.
Replace the toner cartridge.
Rec. paper
Lights when the paper cassette runs out of paper. Re-
fill the cassette with paper.
Memory
Lights when there are documents in the memory.
In use
Lights when your fax is using the telephone line.
ቮ Manual RX
Switches the fax between the auto and manual receive
mode.
ቯ Direct TX
Sets the fax in the direct sending mode so you can send
a document ahead of other documents stored in the fax
memory. Direct sending scans a document and sends it
immediately without storing the document in the
memory.
ተ TTI selector
Enters a registered sender’s name to appear at the top
of the document you are sending.
ቱ R
Press to dial an outside telephone number, or an
extension number, when the fax is connected through a
switchboard (PBX).
Program
Registers multi-step setting normally done by pressing
buttons on the operation panel so you can do them at
the press of single button.
Delete file
Deletes documents waiting in memory for sending.
Clear
Clears an entire entry during information registration.
Set
Selects a menu item during data registration.
ቲ Coded dial
A press on the button followed by a three-digit code
dials the telephone number registered for Coded Speed
Dialling under that three-digit code.
Redial
Redials the previous number dialled manually with the
buttons on the numeric keypad.
Hook
Allows you to dial, even with the handset still in the
handset rest.
ታ Directory
Allows you to search for fax/telephone numbers by the
name under which they are registered for speed
dialling and then use the number for dialling.
ቴ Copy
Copies a document.
Stop
Cancels sending, receiving, data registration, and other
operations and returns the fax to the standby mode.
Start/Scan
Starts sending, receiving, copying and other operations.