Filter
Top Products
Canon FAX-L800 User’s Guide ENGLISH
12-5Chapter 12 Other Special Features
PROGRAM button Setup Summary
The default (PRINT REPORT) remains in effect unless you change it.
PRINT REPORT Sets the PROGRAM button to function as a print
transmission report button. Whenever you need a
transmission report for a document you are sending,
just press the PROGRAM button and a transmission
report will print after the document is sent.
REPORT Assigns the PROGRAM button the functions of the
REPORT button. Whenever you need to print a
report, all you have to do is press the PROGRAM
button. This saves you the effort of opening both One-
touch Speed Dialling panels to press the REPORT
button.
D.T. Sets the PROGRAM button to function like the D.T.
button so you do not have to open both One-touch
Speed Dialling panels to press the D.T. button.
TONE Sets the PROGRAM button to function like TONE
button so you do not have to open both One-touch
Speed Dialling panels to press the TONE button.
SCANNING MODE Set up the RESOLUTION, CONTRAST, or
DOCUMENT TYPE buttons for sending special
documents and then store the settings under the
PROGRAM button. The next time you need to set
them before a document transmission, you can set them
with a single button press.
STAMP If you had the optional stamp feature installed for you,
this feature is available. If you select STAMP you can
turn the stamp feature on and off without opening both
One-touch Speed Dialling panels to press the STAMP
button.