Canon FAX-L800 User’s Guide ENGLISH
16-20 Chapter 16Summary of Important Settings
8.POLLING TX For the memory box, turn polling sending on and off.
NO Memory box can not be used as a polling box.
YES Memory box can be used as a polling box.
1.ERASE AFTER TX Set how the document in the memory box is to be handled
after being polled and sent.
ON Document is erased after polling/sending.
OFF Document remains in the memory box after polling/sending.
2.TX DOCUMENT Transmit documents received in the memory box or scanned
into the memory box for polling and receiving.
1.RECEIVED DOCUMENT Set documents received in the memory box for sending after
polling.
TRANSMIT Documents received in the memory box from other faxes can
be transmitted.
NOT TRANSMIT Documents received in the memory box from other faxes can
not be transmitted.
2.SCAN DOCUMENT Set documents scanned into the memory box for sending after
polling.
TRANSMIT Documents scanned into the memory box can be transmitted.
NOT TRANSMIT Documents scanned into the memory box can not be
transmitted.
2.CHANGE DATA Change settings for the memory box or add settings you did not
do when you created the memory box.
SET BOX # Enter the number of the box you want to change.
PASSWORD Enter the password protecting the memory box settings.
You can now change any of the settings listed in the table above.
3.DELETE FILE Delete the general memory box.
SET BOX # Enter the box number of the memory box you want to delete.
PASSWORD Enter the password protecting the memory box that you want to
delete.
4.PRESET POLLING Set up preset polling/receiving setting. (Q11-5)
1.SETUP FILE Set up a setting to poll at preset time.
SET BOX # Create a two-digit preset polling box.
1.FILE NAME Enter the name of the file (24 characters).
2.PASSWORD Enter a four-digit password to protect the polling settings.
3.SELECT LOCATIONS
TEL=
Select the numbers of the fax units you want to poll. Use the
One-touch or Coded Speed Dialling buttons to enter the
numbers of the fax machine that you want to poll.
4.START TIME Set the time(s) that you want to start polling.
EVERY DAY Set up to 5 times for every day.
SELECT DAYS Set up to 5 times for each day selected.