Canon K10158 Printer User Manual


 
3.
Make sure the computer is set up for IrDA operation.
To use IrDA successfully, make sure the following conditions are
satisfied:
You must use Windows 95.
Make sure the infra-red driver Microsoft IR Comm Driver Ver.
2.0 has been installed.
Make sure a COM port has been selected for IrDA with the Printer
Wizard. Allocation of a port for an IrDA wireless interface may
depend on the computer you are using. Usually COM4 can be
selected as an external serial (COM) communications port. For
details about how your system configuration, refer to your
computer manual.
Make sure the BJC-50 is selected as the default printer with the
BJC-50 printer driver.
Only the Microsoft IR Comm Driver Ver. 2.0 can be used as the
IrDA driver for the BJC-50. Other IrDA drivers cannot be used.
The IrDA interface cannot detect the printer status and reset the
printer. If communication between the printer and computer is
interrupted and the print job is stopped, the printer is initialised
automatically. (The buffer memory of the printer is cleared and
the paper is ejected.)
25
Chapter 2 Setting Up the Printer
2