Filter
Top Products
■
Printing area
Paper and special media
The shaded portion in the following figure shows the recommended
printing area for paper and special media. The printer’s mechanical
printing area is inside the 3 mm top/bottom margins. However, we
recommend setting the margins greater than 22 mm because the print
quality degrades below this.
Before you print on Fabric Sheet FS-101, set the paper size for Legal.
The printing area may vary according to settings in the printer driver.
The margins and printable areas for Fabric Sheet are shown below.
3.4 mm
3 mm
7 mm
22 mm
210/148/182 mm
297/210/256 mm
22 mm
6.4 mm
3 mm
7 mm
22 mm
216 mm (8.5 in)
279 mm (11.0 in)
22 mm
6.4 mm
3 mm
7 mm
22 mm
216 mm (8.5 in)
356 mm (14.0 in)
22 mm
3.4 mm
6.3 mm
6.3 mm
6.4 mm
28.4 mm
241 mm
119.6mm
356 mm
20.5 mm
2.8 mm
28mm28mm
31.8mm
31.8mm
9mm 9mm
5.1mm5.1mm
216mm
100
Appendix A Paper Specifications
A4/A5/B5 size
Legal size
Fabric Sheet
FS-101
Glossy Photo
Cards FM-101
Letter size