Canon K10158 Printer User Manual


 
Always press the CARTRIDGE button to move the cartridge holder to
the home position. If you fail to press CARTRIDGE button and the
cartridge holder stays in the centre, after five minutes the buzzer beeps
three times and the cartridge holder automatically returns to the home
position to prevent the print head from drying out.
Performing a test print
To check the printer installation, print a Demonstration. This and other
test prints are described in detail in Chapter 4. (45)
1.
Open the front cover of the printer.
2.
Select one sheet of plain A4 or Letter size paper.
To avoid fouling the platen with wet ink, never attempt to perform a test
print on paper smaller than A4 or Letter size. You can print on either
side of plain paper.
3.
Press and hold down the POWER button until you hear one beep
and release it.
33
Chapter 2 Setting Up the Printer
2