Filter
Top Products
Function ASCII Dec. Hex.
Print continuously from All Characters Chart
ESC \ n1 n2 data 27 92 n1 n2 data 1B 5C n1 n2 data
Print single character from All Characters Chart
ESC ^ 27 94 1B 5E
Set/cancel overscore mode ESC _ n 27 95 n 1B 5F n
n = 0: Cancel overscore mode
n = 1: Set overscore mode
Relative move inline forward ESC d n1 n2 27 100 n1 n2 1B 64 n1 n2
Set printer off-line ESC j 27 106 1B 6A
Alternate Graphics Mode (AGM) codes
When AGM is set to ON, the following commands are available. When the AGM
is not selected, the commands ESC 3, ESC A, and ESC J are used to set different
line spacing.
Function ASCII Dec. Hex.
Set graphics line spacing ESC 3 n 27 51 n 1B 33 n
in n/180 increments; n=1 to 255
Set text line spacing ESC A n 27 65 n 1B 41 n
in n/60 inch per line; n=1 to 255:
Perform graphics line spacing ESC J n 27 74 n 1B 4A n
Line spacing amount is n/180;
n = 0 to 255
Select graphics mode ESC * m n
1 n2 data 27 42 m n1 n2 data 1B 2A m n1 n2 data
Miscellaneous control codes
Function ASCII Dec. Hex.
Select Font Global ESC [ I n1 n2 f1 f2
27 91 73 n1 n2 f1 f2
1B 5B 49 n1 n2 f1 f2
s1 s2 s3 s1 s2 s3 s1 s2 s3
Set 360 dpi graphics FS C B m1 m2 n1 28 67 66 m1 m2 n1 1C 43 42 m1 m2 n1
n2 data n2 data n2 data
Set/Perform graphics line spacing FS C J m n 28 67 74 m n 1C 43 4A m n
m = 0: set n/180 line spacing
m = 4: set n/360 line spacing
119
Appendix C Printer Command Summaries
C