Filter
Top Products
• If the printer is not switched on and the battery requires
recharging, the CHARGE/ERROR lamp will light green and
remain on to indicate that the battery pack is recharging.
• To recharge the battery pack, switch off the printer and connect
the AC adapter if it is not already connected. When the battery
pack is fully charged, the CHARGE/ERROR lamp will go off.
(☞62)
■
Switching the printer on and off
1.
Before you switch the printer on, check the power lock switch on the
right side of the printer. If the power lock switch is in the left
position, slide it to the right.
When the power lock switch is in the left position, it locks the power
switch off so it cannot be switched on accidentally during transportation.
2
1
3
27
Chapter 2 Setting Up the Printer
2