Canon K10158 Printer User Manual


 
Characters on the screen do not match printed characters
Special symbols and graphics codes may be mapped to different ASCII
codes by different computers and printers. Compare the character set in
your computer manual with the printer character set shown in Appendix
B.
Printing beyond edge of page
If the printer is printing only part of each line, try the following
measures.
1.
Make sure the paper is aligned correctly with the left side of the feed
slot.
2.
Check the software application’s setting for the right margin.
The printer may print on the platen when this problem occurs. Clean the
printer platen before starting your print job. (79)
IrDA printing stops and paper is ejected
If printing via the IrDA interface suddenly stops, try the following
measures.
1.
Make sure communication via IrDA is not blocked. (23)
2.
Make sure the IrDA port is clean. Use only a soft, clean cloth to
clean IrDA port.
Printer prints incorrect number of lines on a page
If too few or too many lines are printed on the page, follow the
procedure below.
1.
Check the software application’s page length and top/bottom margin
settings.
2.
Make sure the paper is loaded correctly.
96
Chapter 7 Troubleshooting