Filter
Top Products
4. Slide the paper guide
➊
to the mark for the size of the media you are
loading.
5.
Hold the sheet with the print side up and align the left edge of the
sheet with the stopper
➋
on the left side of the front cover.
6.
Insert the paper straight into the printer
➌
(about 5 cm) until it stops.
Push the sheet in slightly and hold it in place for about two seconds.
The sheet will feed partially into the printer.
If the sheet is too narrow (less than 100 mm), or if the sheet is inserted
diagonally, the buzzer will beep once, the CHARGE/ERROR lamp will
light orange, and the printer will eject the paper from the feed slot. After
the sheet is inserted again correctly, the printer will reverse feed it
slightly and the buzzer will not beep. If POWER lamp is flashing, data
remains to be printed. Press the RESUME button to finish the print job.
7.
Press the RESUME button. The CHARGE/ERROR lamp goes off
and printing starts.
A
4
2
1
3
34
Chapter 2 Setting Up the Printer
Paper guide
Mark for the size
Stopper