Canon K10158 Printer User Manual


 
Normal print sample
To clean the print head
1.
If print quality deteriorates as described above, first clean the print
head. Press and hold down the RESUME button until you hear two
beeps then release it. Cleaning requires about 30 seconds.
2.
After cleaning is completed, print the Nozzle Check Pattern to see if
the print quality has been restored. (45) If horizontal lines are
missing on the Nozzle Check Pattern, the print head may be still
clogged.
3.
Clean the print head unit once again.
If a printed page or the Nozzle Check Pattern is almost blank after
one or two cleanings, the ink cartridge has run out so replace it
with a new one. (66)
If print quality is not restored after replacing the ink cartridge,
start flushing.
To start flushing
1.
Press and hold down the RESUME button for about six seconds
until you hear three beeps. Flushing requires about 60 seconds.
2.
After executing flushing once or twice, print a page or the Nozzle
Check Pattern. (45) If you see irregular dots or lines on the printed
page, this means the print head has worn out.
3.
Replace the BJ Cartridge with a new one. (72)
90
Chapter 7 Troubleshooting