Canon K10158 Printer User Manual


 
Attaching the AC adapter
Read the following precautions before attaching the AC adapter.
Use only the Universal AC Adapter AD-360U supplied with the printer.
Always use the AC adapter indoors, never outdoors.
In case of trouble (smoke, odd smells, etc.), unplug the AC adapter
immediately.
Do not place anything in front of your power outlet that may obstruct
your access to the power supply or put pressure on the AC adapter or
its cord.
When unplugging the AC adapter, always remove it by pulling the
connector, never by pulling the cord.
Do not unplug the AC adapter until you have switched off the printer.
After you switch off the printer if the CHARGE/ERROR lamp
flashes green, this means the battery pack power is low. Leave the AC
adapter connected to the printer and plugged into a power outlet so
the battery pack can be recharged. While the battery pack is charging,
the CHARGE/ERROR lamp lights and remains on until the battery
pack is fully charged. (The time required for recharging is four to six
hours.) When the CHARGE/ERROR lamp goes off, the battery pack
is fully charged.
USE ONLY THE AC ADAPTER SUPPLIED WITH THE PRINTER. DO
NOT USE AC ADAPTERS FOR OTHER CANON BJ PRINTERS OR
ADAPTERS INTENDED FOR USE WITH OTHER ELECTRONIC
DEVICES.
To connect the AC adapter
1.
Connect the power cord
to the AC adapter.
2.
Insert the DC plug
into the printer.
3.
Insert the power cord
into a power source.
26
Chapter 2 Setting Up the Printer