Filter
Top Products
■
Operational problems
This section describes solutions to various problems you may have with
the operation of your printer. Each section contains several solutions.
Try them in the order listed.
Printer does not switch on
When you switch on the printer, the POWER lamp flashes until
automatic print head cleaning is completed. The POWER lamp lights
and stays on when the printer is ready for normal operation. If the
POWER la0mp is not on, the printer is not receiving power.
1.
If the power lock switch is in the left position, slide it to the right.
When the power lock switch is in the left position, it locks the power
switch off so it cannot be switched on accidentally during transportation.
2.
If the AC adapter is not attached, check the CHARGE/ERROR
lamp. If the CHARGE/ERROR lamp lights orange, this means the
battery pack requires charging. Switch off the printer and connect
the AC adapter. The CHARGE/ERROR lamp will remain
illuminated green until the battery pack is completely recharged.
If you want to use the printer immediately, just connect the AC adapter
and use the printer. When you switch off the printer, leave the AC
adapter connected so the battery pack will be continue recharging.
3.
If the AC adapter is connected and the POWER lamp is not on,
check the AC adapter connector on the right side of the printer and
make sure it is completely inserted into the printer.
4.
Make sure the AC adapter is plugged securely into a power outlet. If
the AC adapter is connected to a power strip, make sure that the
power strip is switched on and connected to a power outlet.
87
Chapter 7 Troubleshooting
7