Filter
Top Products
20050401
# [Save Res] does not save the
σ
1 condition in
line 2.
# V-Window settings are automatically
optimized for drawing the graph.
#Executing an analysis function automatically
stores the
F and p values in alpha variables
F and P, respectively.
6-5-21
Tests
After setting all the parameters, use c to move the highlighting to “Execute” and then press
one of the function keys shown below to perform the calculation or draw the graph.
• 1(CALC) ... Performs the calculation.
• 6(DRAW) ... Draws the graph.
Calculation Result Output Example
σ
1G
σ
2 .......................... direction of test
F.................................. F value
p .................................. p-value
o1 ................................. mean of sample 1 (Displayed only for Data: List setting.)
o2 ................................. mean of sample 2 (Displayed only for Data: List setting.)
x1
σ
n-1 ............................ standard deviation of sample 1
x2
σ
n-1 ............................ standard deviation of sample 2
n1 ................................. size of sample 1
n2 ................................. size of sample 2
You can use the following graph analysis functions after drawing a graph.
• 1(F) ... Displays F value.
Pressing 1(F) displays the F value at the bottom of the display, and displays the pointer at the
corresponding location in the graph (unless the location is off the graph screen).
Two points are displayed in the case of a two-tail test. Use d and e to move the pointer.
Press J to clear the F value.
• 2(P) ... Displays p-value.
Pressing 2(P) displays the p-value at the bottom of the display without displaying the pointer.
Press J to clear the p-value.