Filter
Top Products
3-7
Cisco Aironet 1550 Series Outdoor Mesh Access Point Hardware Installation Guide
OL-24247-01
Chapter 3 Troubleshooting
Connecting to the Access Point Locally
Figure 3-2 Console Port Location on Access Point Models AIR-CAP1552C-x-K9,
AIR-CAP1552CU-x-K9, and AIR-CAP1552I-x-K9
Figure 3-3 Console Port Location on Access Point Models AIR-CAP1552E-x-K9 and
AIR-CAP1552EU-x-K9
Note The Cisco part number for the DB-9 to RJ-45 serial cable is AIR-CONCAB1200. To order a
serial cable, browse to:
http://www.cisco.com/pcgi-bin/marketplace/welcome.pl
Step 2 Set up a terminal emulator program on your PC to communicate with the access point. Use the following
settings for the terminal emulator connection: 9600 baud, 8 data bits, no parity, 1 stop bit, and no flow
control.
Step 3 When finished, remove your serial cable, and close the hinged cover (see the “Closing the Access Point
Hinged Cover” section on page 2-13 for instructions).
1 Console port
255263
1
1 Console port 2 Not used
282138
1 2