Filter
Top Products
4-4
Cisco Aironet 1550 Series Outdoor Mesh Access Point Hardware Installation Guide
OL-24247-01
Chapter 4 Installing or Replacing the Backup Battery
Removing a Backup Battery
Removing a Backup Battery
To remove a backup battery, follow these steps:
Step 1 While holding the access point cover open, carefully disconnect the backup battery cable from the
internal connector (see Figure 4-2). Be careful not to touch the radio board components.
Figure 4-2 Battery Backup Location
Step 2 Carefully place the cover onto your static-protected table.
1 Backup battery 3 Internal connector for the backup battery cable
2 Backup battery cable 4 Radio boards (Do not touch)