Filter
Top Products
1-24
Cisco Aironet 1550 Series Outdoor Mesh Access Point Hardware Installation Guide
OL-24247-01
Chapter 1 Overview
Hardware Features
GPS Option
A GPS module is required to accurately track the location of the AP and report it to the controller. to
provide location information for Cisco's AIR-CAP 1552I/C/CU/E/EU/H product line.
For information on routing and securing the cable for the GPS antenna, refer to the 1550 Series GPS
Hardware Mounting Guide.
Metal Enclosure
The access point uses a metal enclosure that can accommodate both indoor or outdoor operating
environments and an industrial temperature operating range of –40 to 131°F (–40 to 55°C). The access
point complies with NEMA 4 and IP67 requirements.
Optional Hardware
Depending on what you ordered, the following optional access point hardware may be part of your
shipment:
• External antennas, depending on which ones you purchased
• Strand mount kit (AIR-ACCSMK1550=)
• Pole mount kit (AIR-ACCPMK1550=)
• Band installation tool for pole mount kit (AIR-BAND-INS-TL=)
• AC power cord, 40 ft. (12.2 m) with North American plug (AIR-CORD-R3P-40NA=)
• AC power cord, 40 ft. (12.2 m) with European unterminated end (AIR-CORD-R3P-40UE=)
• Street light power tap (AIR-PWR-ST-LT-R3P=)
• Power injector (AIR-PWRINJ1500-2=)
• 1000BASELX single-mode Rugged SFP (GLC-LX-SM-RGD=)
• 1000BASESX multimode Rugged SFP (GLC-SX-MM-RGD=)
• EPON ONU Rugged SFP module
• Battery, 6 amp hour (AIR-1520-BATT-6AH)
• FIPS kit (AIRLAP-FIPSKIT=)
• Optional directional-antenna mounting kit (AIR-ACCAMK-1)
• Lightning Arrestor kit (CGR-LA-NM-NF)
• Third-party lightning arrestors as required by local authorities