Filter
Top Products
2-11
Cisco Aironet 1550 Series Outdoor Mesh Access Point Hardware Installation Guide
OL-24247-01
Chapter 2 Installing the Access Point
Installation Guidelines
series of standards. To meet CAN/CSA-C22.2 No. 60950-22-07/UL60950-22 requirements, the installer
may use alternative components to provide this additional protection. Those components may comply
with ANSI/IEEE C62.11, CSA Certification Notice No. 516, CSA C22.2 No. 1, or UL 1449. Suitability
of the components for the application must be determined for the intended installation. (For example,
some devices are suitable for installation on the load side of the service entrance only, and some are
suitable for use with cord-connected equipment only.)
Warning
Installation of the equipment must comply with local and national electrical codes.
Statement 1074
Figure 2-2 Pole Mount Installation
1 Stainless steel mounting straps
(part of pole mount kit)
4 Cisco Aironet Dual-Band Omnidirectional
Antennas. The dual-band antenna covers both
the 2.4 GHz and 5 GHz bands.
2 Pole (wood, metal, or fiberglass)
2 to 16 in. (5.1 to 40.6 cm) diameter
5 1552 series access point model
AIR-CAP1552E-x-K9
3 Mounting bracket (part of pole mount kit)
1
4
1
2
4
4
255239
5
3