Filter
Top Products
Contents
v
Cisco Aironet 1550 Series Outdoor Mesh Acces Point Hardware Installation Guide
OL-24247-01
Installing 1552C or 1552CU in the Mounting Bracket 2-26
Cable Strand Mounting the 1552C or 1552CU Access Point 2-26
Mounting the 1552C or 1552CU Access Point on a Pole/Wall 2-30
Mounting the 1552C or 1552CU Access Point Facing Up in a Vault Application 2-33
Installing Antennas 2-36
Antenna N-Type Connector Locations 2-37
Antenna Mounting Options 2-38
Safety Precautions 2-41
Grounding the Access Point 2-41
Connecting a Fiber-Optic Cable to the Access Point 2-42
Powering the Access Point 2-45
Connecting a 1500 Series Power Injector 2-45
Connecting an Ethernet Cable to the Access Point 2-46
AC Power Cords for Cisco Aironet 1550 Series Outdoor Mesh Access Points 2-49
Connecting Streetlight AC Power 2-51
Connecting an AC Power Cable to the Access Point 2-54
Connecting a DC Power Cable to the Access Point 2-55
Connecting a Cable POC Power to the Access Point 2-58
Configuring the Access Point 2-60
Adding the Access Point MAC Addresses to the Controller Filter List 2-60
Configuring a RAP 2-61
Configuring a Bridge Group Name 2-61
What to Do Next 2-63
CHAPTER
3 Troubleshooting 3-1
Guidelines for Using the Access Points 3-2
Important Notes 3-2
Convergence Delays 3-2
Bridge Loop 3-3
Controller DHCP Server 3-3
MAP Data Traffic 3-3
Controller MAC Filter List 3-3
Using DHCP Option 43 3-4
Monitoring the Access Point LEDs 3-4
Verifying Controller Association 3-5
Changing the Bridge Group Name 3-6
Connecting to the Access Point Locally 3-6
Access Point Power Injector 3-8