Filter
Top Products
Chapter 3 Managing ITP Networks Using SGM
Working with Signaling Points
3-140
Cisco Signaling Gateway Manager User Guide
78-15589-01
• Events—Indicates whether there is a recent event associated with the
signaling point.
During Discovery, SGM might flag most signaling points with an event icon.
If the event icons are too distracting, select Edit > Clear All Events from the
SGM Main Menu to remove them.
• Last Status Change—Date and time that the status of the signaling point last
changed.
• Status—Current status of the signaling point. Possible values are:
–
Active (green ball)—The signaling point is currently fully functional.
–
Unknown (red ball)—One of the following conditions occurred:
– SGM cannot poll the node associated with the signaling point. SGM
sets all signaling points, linksets, and links associated with the node to
Unknown.
– The signaling point has been unconfigured on the ITP, or the
configuration is incomplete. At the next poll, SGM determines that the
signaling point does not exist, and sets the signaling point and all
associated linksets and links to Unknown.
–
Unmanaged (gray ball)—An SGM user has set the signaling point to
Unmanaged status, to prevent SGM from polling the signaling point.
SGM automatically deletes all associated links and linksets.
–
Warning (yellow ball)—The signaling point is active, but one or more
associated links or linksets is in Failed, Unavailable, Unknown, or
Warning status and is not flagged as Ignored.
• Status Reason—Reason for the current status of the signaling point. Possible
values are:
–
None
–
SGM Restart
–
Unsupported Configuration
–
Unconfigured
–
SNMP Timeout
–
Device is unreachable, possibly wrong community string
–
Not ITP Device
–
Not Configured for ITP