Filter
Top Products
3-95
Cisco Signaling Gateway Manager User Guide
78-15589-01
Chapter 3 Managing ITP Networks Using SGM
Working with Nodes
If the associated signaling points are not referenced to other signaling
points, SGM automatically deletes the signaling points, all associated
linksets and links, and all linksets and links that reference the node as an
adjacent node.
–
Waiting (gray ball)—The node is in the Discovery queue but is not
currently being discovered.
–
Warning (yellow ball)—The node is active, but one or more associated
signaling points, linksets, or links is in Failed, Unavailable, Unknown,
or Warning status and is not Ignored.
• Status Reason—Reason for the current status of the node. Possible values
are:
–
None
–
SGM Restart
–
Unsupported Configuration
–
Unconfigured
–
SNMP Timeout
–
Device is unreachable, possibly wrong community string
–
Not ITP Device
–
Not Configured for ITP
–
MIB Data Error
–
SNMP Exception
–
SignalingPoint Inactive
–
Linkset Inactive
–
Link Congested
–
Link Send Utilization Threshold Exceeded
–
Link Receive Utilization Threshold Exceeded
–
Link Local Interface Inactive
–
Link Remote Interface Inactive
–
Link Inactive
If the cell is too small to show all of the status reason, place the cursor over
the cell to see the full status reason in a mouse over help popup.