Filter
Top Products
3-283
Cisco Signaling Gateway Manager User Guide
78-15589-01
Chapter 3 Managing ITP Networks Using SGM
Editing an ITP Route Table File
From the drop-down list box of signaling points, select the signaling point
with the point code, variant, and network name that matches the route table
file you want to edit.
–
If you select a signaling point that has the wrong variant, SGM displays
the message, “Point code out of range.”
–
If you select a signaling point that has the correct variant but the wrong
instance, SGM displays the Replace Linkset Dialog, prompting you to
replace or remove most or all of the linksets.
SGM reads the active route table from the ITP and displays it in the Route
Table Dialog (Figure 3-66).
Figure 3-66 Route Table Dialog
The route table lists destination point codes and associated destination linkset
names, as well as other important information used to route packets on a node.
Press Enter to move down to the next row in the route table; press Tab to move
to the next field.