Filter
Top Products
3-65
Cisco Signaling Gateway Manager User Guide
78-15589-01
Chapter 3 Managing ITP Networks Using SGM
Working with Linksets
• Receive Utilization—Amount of the linkset’s receive capacity being used, as
a percentage or in Erlangs (as set in the Preferences window), calculated
using the following formula:
Receive Utilization = (Bits Received Per Sec)/Receive Plan Capacity
This field initially displays the phrase Waiting for second poll. After two
polling cycles, SGM populates this field with actual calculated rates.
–
For a linkset of type SCTPIP or Mixed, if Receive Plan Capacity is not
set on the ITP for this linkset, this field displays the phrase Set Plan
Capacity on ITP.
–
For a linkset of type Other, this field always displays the phrase Set Plan
Capacity on ITP.
Statistics Tab: Service Information
To view service information for the selected linkset, select the Statistics tab.
The Service Information sub-section displays the following information for the
selected linkset:
• MTP3 Accounting Enabled—Indicates whether the collection of MTP3
accounting statistics is enabled for the linkset.
• GTT Accounting Enabled—Indicates whether the collection of GTT
accounting statistics is enabled for the linkset. For Cisco IOS software
releases prior to 12.2(4)MB10, this field displays Unknown.
• Duration In Service %—Percentage of time the linkset has been in service
since the last reboot of the ITP, or since ITP last reset the counters.
• Duration Out Of Service %—Percentage of time the linkset has been out of
service since the last reboot of the ITP, or since ITP last reset the counters.