Filter
Top Products
Chapter 3 Managing ITP Networks Using SGM
Editing a Global Title Translation Table
3-320
Cisco Signaling Gateway Manager User Guide
78-15589-01
• CPC List Name—Name of the CPC list to be associated with this MAP.
Enter a CPC list name.
• Re-route if Congested—Indicates whether the MAP is to be routed to the
backup point code-SSN combination if the primary combination is
congested:
–
If you want to route the MAP to the backup combination when the
primary combination is congested, select the checkbox.
–
If you do not want to route the MAP to the backup, clear the checkbox.
This is the default setting.
• Adjacency—Indicates whether a point code-SSN combination is to be
considered adjacent to the local node for SCCP management:
–
If you want the point code-SSN combination be considered adjacent to
the local node, select the checkbox.
–
If you do not want the point code-SSN combination be considered
adjacent to the local node, clear the checkbox. This is the default setting.
Enter or select values for the new MAP entry, then click Add. SGM adds the MAP
entry to the MAP Table.
When you are done adding MAP entries, click Close to close the MAP Add
Dialog.