Filter
Top Products
Chapter 3 Managing ITP Networks Using SGM
Working with Links
3-190
Cisco Signaling Gateway Manager User Guide
78-15589-01
Configuration Data Tab: Remote IP Address Information (SCTP Links Only)
To view remote IP address information for the selected SCTP link, select the
Configuration Data tab.
The Remote IP Address Information sub-section displays the following
information for the selected link:
• IP Address—Remote IP address associated with the link.
• Type—Indicates the designated primary IP address for the link (Primary)
and the IP address currently being used by the link (Effective).
Usually, the same IP address is both Primary and Effective. However, if the
primary IP address is down for some reason, a different IP address is used by
the link and is labeled Effective.
• Status—Current status of the IP address. Possible values are:
–
Active (green ball)—The IP address is currently fully functional.
–
Inactive (red ball)—The IP address is not currently functional.
Configuration Data Tab: Configured Local IP Address Information (SCTP Links Only)
To view configured local IP address information for the selected SCTP link, select
the Configuration Data tab.
The Configured Local IP Address Information sub-section displays the following
information for the selected link:
• IP Address—Configured local IP address associated with the link.
• Interface Name—Primary IP address and interface name of the link. The
primary IP address is the first CS7 local IP address configured in the ITP. For
example, if the following IP addresses are configured in the ITP:
cs7 local-peer 4180
local-ip 128.3.0.77
local-ip 128.3.0.254
Then SGM uses 128.3.0.77 as the primary IP address. If at any time that IP
address is deleted from the ITP configuration, or if a new IP address is added
to the beginning of the list, SGM detects the change and automatically
updates this field to reflect the new primary IP address.
If the link has no interface name, this field is blank.