Filter
Top Products
Chapter 3 Managing ITP Networks Using SGM
Editing a Global Title Translation Table
3-312
Cisco Signaling Gateway Manager User Guide
78-15589-01
• Configure By Point Code—Indicates whether to configure the GTA by point
code. To configure the GTA by point code, select this radio button.
SGM makes the Config By Point Code fields available, and grays-out the
Config By App Group fields. This is the default setting.
• Configure By App Group—Indicates whether to configure the GTA by
application group. To configure the GTA by application group, select this
radio button.
SGM makes the Config By App Group fields available, and grays-out the
Config By Point Code fields.
• Configure By Application Server Name—Indicates whether to configure
the GTA by application server name. To configure the GTA by application
server name, select this radio button.
SGM replaces the Config By Point Code fields with the Config By
Application Server name fields, and grays-out the Config By App Group
fields.
• Point Code—Destination point code for the GTA. Enter a point code. This
field is available only if Configure By Point Code is selected.
• Routing Indicator—Routing indicator for the GTA. Select a value from the
drop-down list box. Valid values are:
–
gt—Route on the global title. This is the default routing indicator.
–
pcssn—Route on the point code and SSN.
This field is available only if Configure By Point Code or Configure By
Application Server Name is selected.
• Subsystem Number—Destination SSN for the GTA. Enter an integer in the
range 2 through 255. This field is mutually exclusive with the New
Translation Type field. This field is available only if Configure By Point
Code or Configure By Application Server Name is selected.
• New Translation Type—Translation type to be used by the GTA. Enter an
integer in the range 0 through 255. This field is mutually exclusive with the
Subsystem Number field. This field is available only if Configure By Point
Code or Configure By Application Server Name is selected.