Filter
Top Products
Chapter 3 Managing ITP Networks Using SGM
Working with Linksets
3-56
Cisco Signaling Gateway Manager User Guide
78-15589-01
Configuration Data Tab: Naming Information
To view naming information for the selected linkset, select the Configuration
Data tab.
The Naming Information sub-section displays the following information for the
selected linkset:
• Name—Name of the linkset.
• Local Point Code—Point code of the primary node for the linkset.
• Adj Point Code—Point code of the adjacent node for the linkset.
• Last Status Change—Date and time that the status of the linkset last
changed.
• Status—Current status of the linkset. Possible values are:
–
Active (green ball)—The linkset is currently fully functional.
–
Unavailable (red ball)—An error is preventing traffic from flowing on
this linkset.
–
Shutdown (blue ball)—An ITP administrator has set the linkset to
prevent traffic from flowing. When a linkset is set to Shutdown, all its
associated links are set to Failed by Cisco IOS.
–
Unknown (red ball)—Either the node associated with this linkset has
failed to respond to an SNMP request, or SGM found that the linkset no
longer exists.
–
Warning (yellow ball)—The linkset is active, but one or more links in
the linkset is congested or is in Failed, Unknown, or Warning status,
and is not Ignored. At least one link is available and can carry traffic.
• Status Reason—Reason for the current status of the linkset. Possible values
are:
–
None
–
SGM Restart
–
Unsupported Configuration
–
Unconfigured
–
SNMP Timeout
–
Device is unreachable, possibly wrong community string
–
Not ITP Device