Filter
Top Products
3-329
Cisco Signaling Gateway Manager User Guide
78-15589-01
Chapter 3 Managing ITP Networks Using SGM
Editing a Global Title Translation Table
Figure 3-86 Semantic Check GTT Dialog
The Semantic Check GTT dialog contains the following fields:
• ITP Name or IP Address—Name or IP address of the ITP against which to
check the GTT file.
Enter the name or IP address of an ITP and click OK. SGM closes the Semantic
Check GTT dialog and opens the Progress Dialog (Figure 3-85).
The Progress Dialog displays the progress of the semantic check for the GTT file,
as well as any messages generated while checking the file.
To cancel the check, click Cancel.
When the check is complete, click OK. SGM closes the Progress Dialog and
returns to the Semantic Check GTT dialog.
To close the Semantic Check GTT dialog without checking the semantics of the
GTT file, click Cancel.
Note You can also use the sgm gttcheck command to semantics of a GTT file.
For more information on the use of this command, see the “SGM
Commands and Descriptions” section on page B-2.
Step 24 (Optional) To display basic information about the currently displayed GTT file,
select View > GTT Table Info from the GTT menu. SGM displays the GTT Table
Info Dialog (Figure 3-87).