Filter
Top Products
Chapter 3 Managing ITP Networks Using SGM
Working with SGM Statistics Reports
3-366
Cisco Signaling Gateway Manager User Guide
78-15589-01
• Linkset—Name of the linkset. To see statistics for only a selected linkset,
click the linkset name.
• Gateway Screening—Indicates whether the traffic passed or failed the
Gateway Screening test at the ITP. To see only statistics that passed or failed
for a specific linkset, select a linkset and click Pass or Fail.
• OPC—Originating point code of the traffic, which is a unique identifier for
each set of statistics. To see only statistics that match a specific OPC for a
given linkset, find the linkset and click the point code.
• DPC—Destination point code of the traffic. To see only statistics that match
a specific DPC for a given linkset, find the linkset and click the point code.
• SI—Service indicator, which indicates the type of SS7 traffic, such as ISUP
or SCCP. To see only detailed information for a specific type of SI, click the
SI type.
• Send MSUs—Total number of MTP3 MSUs sent on the specified date.
• Recv MSUs—Total number of MTP3 MSUs received on the specified date.
• Send Bytes—Total number of bytes sent on the specified date.
• Recv Bytes—Total number of bytes received on the specified date.
If a statistics calculation results in an impossible value, such as a number divided
by zero, or a number that is impossible based on the configuration, SGM displays
MathError in the field.
SGM enables you to modify the way information is presented in the Accounting
Statistics: Daily Detail Report page:
• You can sort the Accounting Statistics: Daily Detail Report page based on the
information in one of the columns. See the “Resizing, Sorting, and Hiding
Table Columns” section on page 3-279 for more details.
• To display only the top 10 or bottom 10 records, based on the column by
which the table is sorted, click the Top 10 menu option:
–
If the column is sorted in descending order, displays only the top 10
records.
–
If the column is sorted in ascending order, displays only the bottom 10
records.
–
To switch between the two displays, left-click the column header.